Red Hat Linux 7.0 Installation with Screen Shots

Red Hat Installation 7.0 Installation Step by step with Screen-Shots

This is Red Hat 7.0(Red Hat Enterprise Linux)Installation,step by step  walk through with  screen shots.

Step:1 Boot the installation media on Intel,AMD systems.

After booting the installation media

Step:2 Select “Install Red Hat Enterprise Linux” in the boot menu and press “Enter”

Step:3 After “Anaconda Red hat installer started,Select your Language and Region ” , and click “continue”

 

Step:4 From the Installation Summary Set the Required Configuration from the options

Step:5 Select Date and Time

a)Set your Region and nearest city in your time zone

b)click done to return to Installation Summary

Here i have chosen my Region as  “Asia” and Nearest city as “Kolkata”

Step:5 Select the Keyboard Layout

a)Use the “+” and “-“ Button to add or remove the Keyboard Layouts

b)Click “Done” to return to the “Installation Summary”

 

 

Step:6 Select “Installation Source”

In this you will need to select the source media for installation,

Step:7 Select “Installation Destination”

a)Select the Target Disk. A check mark is displayed next to the selected target

The selected Target is partitioned automatically by default or If you want to configure the manual partition Layout you will need to select the manual option

Step:8  Return to “Installation Summary ” and select “Software Selection”,and choose “Server with GUI” Cluster to get the Graphical Access.

Note:If you choose the Minimal Package cluster then you will not get the Graphical Access after Installation,You will use only the Command Line options.

After Selecting the “Software Selection” Option you will  get the options to select the cluster to be install as shown below

Step:9 Select “Network and Host name”

a)Select the “Ethernet” sliding

b)Click “Done” to return to the “Installation Summary”

Note: In RHEL 7.0 Network Configuration is Done Immediately.In previous versions they are used during the setup and after installation.
Step:10 On the Installation summary screen,click “Begin Installation”

Step:11 Installation begins and the configuration menu is displayed

During the installation,

a) select root password and configure

b) Create a Non-root user account

Select “user creation”

a) Enter user full name

b)Create a password

Once configured you will get the confirmation as shown below

If you installed the server with “Server with GUI”  base environment,the initial setup application is started automatically

a)Accept the License agreement

b)Register the system

Then Click “Finish Configuration”

Step:12 Enable/Disable “kdump”

Step:13 Subscription Registration Manager

To register your server with the RHN Network you will need to connect the server to online

If you want to register later choose “No i prefer to register Later time”

Then click “Finish” to complete the installation process

Then Login in to Red hat 7.0 Desktop

After assigning the root password you will get the default desktop Look as follows

That’s all installation Done!!!!!!!!!!!!!!!!

Click here to check RHEL 6.0 Installation RHEL 6.0 Installation Step by Step with Screen Shots

RHEL 7.0 Installation Video Check it out  at my YouTube Channel RHEL 7.0 Installation video

*********************************************************************************************************************************

If you Appreciate what i do here on linuxvasanth.com,you should consider:

1.Subscribe to our email Updates: Sign Up Now

2.Subscribe to our YouTube Channel: Sign Up Now My You Tube Channel

3.Follow My Facebook Page: Sign Up Now

4.Share it with your friends

************************************************************************************************************************************

 

Rhel 6 installation Step by Step

Installing RHEL 6:

Red Hat Enterprise Linux(RHEL 6) is  Linux operating system Developed by Redhat.RHEL is available on multiple platforms including x86,x86_64, IBM P-series, IBM System-Z. Redhat is one of the most widely used Operating systems on Enterprise Level. Many other Linux distribution has been cloned from Redhat Enterprise Linux, these include CentOS and Oracle Linux.

To start the installation process:

Step:1 Select “Install or upgrade the Linux system

You can reach me  at  vasanth@linuxvasanth.com

Step:2 Begin Test Media Before Installation

It is always advisable to begin test media for any error before you starting the installation process.In this example, i choose to skip option as i have done the check already.

Step:3 Welcome screen

At this screen, choose next to continue with the installation

Step:4 Select installation Language

At this screen you should select a language you would like to use during the installation, Here i choose “English”

Step:5 Select Appropriate Keyboard

Select the keyboard you would like to use, here i have choosen  us-english

Step:6 Select the devices to be used during the installation

Two options are avaiable here,from that here i have choosen Basic storage device option as we are installing on a x86 system using local harddrive.

Step:7 Configure your Server Host name

Here you have to give one new host name by which it can be identified on your network.

Step:8  Select your Time Zone

Here you will need to locate the nearest  city to your site. I have choosen  Asia/Kolkata

Step:9 Assign a new root user password

you have to set a strong password. Never give a password based on the dictionary words. The password should contain Upper and lower cases with the mixture of special charcters.

Step:10 Select Storage Installation type

You can choose various options where you can use all space avaiable or delete any existing parition, create a custom parition type, here I go with the custom layout type

 

Step:11 Select a Disk to create Partition

Here i have only one disk /dev/sda, select “Standard partition”

 

Step:12 Add the parition “/”

Create “/” parition with the minimum size, here i gave 18Gb

Step 13: Confirm the assigned parition details

Select “yes” and press enter to go confirm

Step:14  Writing storage configuration to Disks

choose write changes to disks and press enter

Step:15 Choose the Disk to install Boot Loader

Select the disk to install the boot loader and press enter , here i choose /dev/sda disk to install the bootloader

Step:16 Select the Installation type

The default installation of RHEL is that of a basic server. There are lots of option available depending on what your server will be used for. Depending on which options you choose, various packages will be included automatically with your installation .In this i have choosen “Desktop” type.

Step:17 Package installation

Here the packages we have choosen manually  will be installed and this process may take a while depending upon your choices

Step:18 Congratulations your installation is now complete

Congratulations, you have now installed RHEL. You will need to reboot your system

 

Step:19 Welcome Screen

After the installation, you will get the welcome screen, choose  “forward” to continue

Step:20 Software updates

From this screen, you can install the updates or if you want to install the updates later you  will have the options to select that

Step:20 Create a Non-root user account

You should create a non-root user account ,This account will be used for all non-administration tasks

Step:21 Setup Date and Time

Check that you have the correct date and time . You may also specify  to syncrnoize your time with a time server over the network. In real envirnonment, many organazations will use sepreate time servers for this functionallty.

Step:22 Kdump

kdump is used to collect the server information after a server crash. You will need to give the double the size of the RAM for this configuration

Step:23 Login Screen

At this login screen, you will need to choose the user account to log in, choose others and give “root” at the username field to log in to the server as a root user.

I hope you have enjoyed this tutorial, if so Kindly subscribe and share it with your friends.
                                          🙏🙏 Thank you 🙏🙏

 

You can reach me  at  vasanth@linuxvasanth.com

 

#############################################################
For More Videos Subscribe My Youtube Channel  Linux Vasanth
If you found this article useful, Kindly Subscribe here 👉  Click this link to Subscribe

################################################################################